Dished knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Low and dished, so the thumb sits in it rather than on it. Good where a knob must not stand proud of the panel. For the fine split shaft with 24 teeth. The number that trips people up: this shaft measures 5.97 mm over the knurl, not 6.35 - the 1/4 inch is the plain body, the splines are turned down. A knob bored for 6.35 sits loose and spins. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 15.6 mm | 1.8 cm…

♥ 0

Cults3D'da aç

#control knob #knob #dished knob #597mm shaft #24 spline #24 teeth #knurled shaft #split shaft #electric guitar #knurled replacement control knob #guitar pedal #amplifier

Benzer modeller

Dished knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dished knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dished knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports
Cults3D

Dished knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dished knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dished knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dished knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Dished knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports

Dished knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Dished knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports