Dome knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

A dome over a knurled band. The dome is deliberately flatter than a hemisphere: a true half-sphere would print at 65 degrees of overhang and need supports. For the fine 40-tooth knurled 6 mm shaft. Four manufacturers dimension this one identically: 6.0 mm over the teeth, knurl 7 mm long. Press-fit. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 16.6 mm | 2.2 cm³ | 2.8 g | | 20 mm | 16.6 mm | 3.3 cm³ | 4.2…

♥ 1

Cults3D'da aç

#control knob #knob #dome knob #6mm shaft #40 spline #40 teeth #knurled shaft #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer

Benzer modeller

Dome knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dome knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dome knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dome knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dome knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Dome knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Dome knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D

Dome knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dome knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports