Flat duct to round adapter 220x90 to 125 mm, socket on flat end – offset, flush to wall

$2,24CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Transition from a 220 × 90 mm flat duct to a 125 mm round duct, made to sit flat against a wall or a ceiling: the back is one flat plane, and the round end sits off-centre so that its rim lies in that plane too. The flat end is an open-back socket (U-socket), the round end a spigot. **Picture 1:** multi-view drawing with all dimensions, the cross-sections and the flat mounting plane. **Picture 2:** the part as a render. **Picture 3:** a section view. **Picture 4:** the flat back that sits again…

♥ 0

Cults3D'da aç

#flat duct to round #offset duct adapter #rectangular to round #220x90 to 125mm #wall mount duct #flat duct socket #air duct #220x90mm #flat duct #slim duct #mvhr duct #hvac duct

Flat duct to round adapter 220x90 to 125 mm, socket on flat end – offset, flush to wall

Benzer modeller

Übergang Flachkanal 220x90 auf rund 125 mm, Muffe am eckigen Ende – versetzt, bei Wand bündig

Flat duct to round adapter 220x90 to 125 mm – offset, flush to wall, wall/ceiling mount, no supports

Flat duct to round adapter 220x90 to 150 mm, narrow side to wall, socket on flat end – offset

Flat duct to round adapter 220x90 to 150 mm, socket on flat end – offset, flush to wall

Flat duct to round adapter 220x90 to 150 mm, narrow side to wall – offset, flush to wall

Flat duct to round adapter 220x90 to 150 mm – offset, flush to wall, wall/ceiling mount, no supports

Übergang Flachkanal 220x90 auf rund 150 mm, Muffe am eckigen Ende – versetzt, bei Wand bündig

Wall-mount duct system 220x90 mm – set of 27: flat-to-round adapters, flush reducers, wall couplers

Flat duct to round adapter 110x54 to 80 mm, socket on round end – offset, flush to wall

Flat duct to round adapter 100x50 to 80 mm, socket on flat end – offset, flush to wall

Flat duct to round adapter 150x100 to 125 mm – offset, flush to wall, wall/ceiling mount

Flat duct to round adapter 204x60 to 125 mm, narrow side to wall, socket on flat end – offset