Flexi Scorpion | Print-in-Place Articulated | Halloween | No Supports

An articulated scorpion with eighteen moving pieces: eight curved legs, two pincer claws and a five-piece tail that ends in a stinger. Every leg and every tail piece bends on its own. About 200 mm long - check your bed size. **Print-in-place.** It comes off the plate already moving - no supports, no glue, no assembly. - Every joint is a captive pin with a 45-degree collar, so it can never pull apart - 0.45 mm air gap at every joint, tested in the slicer - Prints flat on the bed, no raft and no…

♥ 0