Hexagon knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

$1,11CULTS PU - Private Use

Six flats instead of eight. Reads as a tool size and looks right next to anything held by hex screws. Takes a DIN 934 hex nut M4 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M4 is what most printer beds, carriage plates and small fixtures use. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 20 mm | 11.2 mm |…

♥ 0

Cults3D'da aç

#control knob #knob #hexagon knob #7mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Benzer modeller

Hexagon knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Hexagon knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Hexagon knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Hexagon knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Hexagon knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D

Hexagon knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Benzer modeller

Hexagon knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Hexagon knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Hexagon knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Hexagon knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Hexagon knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports