Hexagon knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

$1,11CULTS PU - Private Use

Six flats instead of eight. Reads as a tool size and looks right next to anything held by hex screws. Takes a DIN 934 hex nut M8 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M8 is the machine-table size: clamps, stops, anything that must not shift under a cut. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| |…

♥ 0

Cults3D'da aç

#control knob #knob #hexagon knob #13mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Benzer modeller

Hexagon knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports
Cults3D
Hexagon knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports
Cults3D
Hexagon knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Hexagon knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Hexagon knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Hexagon knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Hexagon knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports
Cults3D

Hexagon knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Benzer modeller

Hexagon knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Hexagon knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Hexagon knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Hexagon knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Hexagon knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Hexagon knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Hexagon knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Hexagon knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports