Into the Infested Zone
DDF Models and Miniatures · MyMiniFactory
Lisans bilgisi ve sorumluluk reddi
Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.
personal usenon-commercial use All "into the Infested Zone" stl files are:Plump Jenna & Firelander zx2 motorbikeInfested biting bruteInfested spider walker All Stl Models are:in 32/75/150mm Scale Presupportedin 32mm & 100mm Scale Not Presupported {you chose the scale to print}
♥ 30
MyMiniFactory'da açBenzer modeller
MOD for converting Gacha Pop V2 into Keurin Coffee Pod vending machine
Printables
PTFE Passthrough Plug for 19mm (3/4) hole into 3mm (1/8) plexi
Printables
Rear right corner w/ added inner PTFE tubes shelf (to keep the inner 4 x PTFE tubes straight and level at connectors exit, to avoid jams there) for CC1 Canvas Relocation & Riser project (replaces "AEE_45_Deg_Corner_RR_PTFE" no LED part in origin project)
Printables
A Homeowner's Guide to Roof Repairs in Hemel Hempstead
Thingiverse
Freewing 70mm F-16 into Mitsubishi F-2 Viper Zero Conversion Parts
Thingiverse
Skull In Beret - Image to STL - SupaVoxel
Sketchfab
Anime Girl in Bikini - Image to 3D - SupaVoxel
Sketchfab
Anime Girl in Red Bikini - Image to 3D SupaVoxel
Sketchfab
Anime Girl in Red Top - PNG to STL - SupaVoxel
Sketchfab
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/9a25ab60-d54e-4e53-9846-ca9a3ac8544d/PieCut_38.1mm_15deg_1_main.png)
38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL
Cults3D
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/0fa43ff9-1c10-4146-913a-812a4e0e1247/PieCut_38.1mm_10deg_1_main.png)
38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL
Cults3D
Small Wire Looms with snap on caps that I made when running speaker wires for an 8 speaker system in a pavilion. They worked out great as you can screw these in place and then run all your wires and snap them into place
Thingiverse