LiFePO4 battery box 228-230 Ah 4S 12.8 V, rounded shell - EVE LF230, CATL 228 Ah, 174x54x207 mm cells, XT60

$3,36CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Enclosure for a 4S LiFePO4 pack built from four 228-230 Ah prismatic cells. Four cells stand upright in separate bays; a 39 mm compartment next to them takes the BMS and the wiring. Variant: RoundProtect - rounded shell, softer corners. WHICH CELLS FIT Designed around the LARGEST cell of the family, so smaller cells of the same format fit as well: - EVE LF230, 230 Ah, 173.93 x 53.85 x 207.3 mm - CATL 228 Ah, 228 Ah, 173.93 x 53.72 x 207.2 mm Each bay carries 2.0 mm of swell clearance across the…

♥ 0

Cults3D'da aç

#228-230ah #eve lf230 #catl 228 ah #roundprotect #lifepo4 #battery box #prismatic cells #battery pack #diy powerwall #solar #off grid #camper

LiFePO4 battery box 228-230 Ah 4S 12.8 V, rounded shell - EVE LF230, CATL 228 Ah, 174x54x207 mm cells, XT60

Benzer modeller

LiFePO4 battery box 228-230 Ah 4S 12.8 V, compact - EVE LF230, CATL 228 Ah, 174x54x207 mm cells, XT60

LiFePO4 cell holder 8S 24 V for CATL 228 Ah M8 - open cage, with and without floor mount

LiFePO4 cell holder 8S 24 V for CATL 228 Ah M6 - open cage, with and without floor mount

LiFePO4 cell holder 4S 12 V for CATL 228 Ah M8 - open cage, with and without floor mount

LiFePO4 cell holder 4S 12 V for CATL 228 Ah M6 - open cage, with and without floor mount

LiFePO4 Zellenhalter 8S 24 V für CATL 228 Ah M6 – offener Käfig, mit/ohne Bodenbefestigung

LiFePO4 Zellenhalter 4S 12 V für CATL 228 Ah M8 – offener Käfig, mit/ohne Bodenbefestigung

LiFePO4 Zellenhalter 4S 12 V für CATL 228 Ah M6 – offener Käfig, mit/ohne Bodenbefestigung

LiFePO4 cell holder set - 20 models, 4S and 8S open cages for 174 mm cells 228-360 Ah

LiFePO4 Zellenhalter-Set – 20 Modelle, offene 4S- und 8S-Käfige für 174-mm-Zellen 228–360 Ah

LiFePO4 battery box 300 Ah 4S 12.8 V, rounded shell - WB-LYP300AHA, 362x56x306 mm cells, XT60

LiFePO4 battery box 100 Ah 4S 12.8 V, rounded shell - CALB CA100, 140x67x216 mm cells, XT60