Manifold 4 port and 2 port

ÜcretsizCreative Commons - Attribution - Noncommercial - ShareAlike

Ticari kullanım: izinli görünmüyor · Atıf istiyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This is a model of a 4 port and 2 port manifold.

♥ 3

MyMiniFactory'da aç

#port #manifold

Benzer modeller

Absaugungsverteiler 100mm zu 3x 50mm mit und ohne Wandhalter / 100 mm Exhaust Manifold to 3 x 50 mm, with and without wall mount
Thingiverse
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL
Cults3D
PAPP TPMS Filter — Schwarz P
Sketchfab
PAPP TPMS Filter — Gyroid
Sketchfab
FlowerOfLife_19_Rainbow_64Spoke_V2
Sketchfab
44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL
Cults3D
44.45 mm / 1.75 in 15° Pie Cut Template – 6 Sector 90° Elbow – 1D / 1.5D / 2D Radius – Bandsaw Mitered Bend Jig STL
Cults3D
42.4 mm / 1.67 in Pie Cut Jig Kit 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Lobster Back Bend Set STL
Cults3D
Chroma Kit Manifold
Printables

Manifold 4 port and 2 port

Benzer modeller

Absaugungsverteiler 100mm zu 3x 50mm mit und ohne Wandhalter / 100 mm Exhaust Manifold to 3 x 50 mm, with and without wall mount

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL

PAPP TPMS Filter — Schwarz P

PAPP TPMS Filter — Gyroid

FlowerOfLife_19_Rainbow_64Spoke_V2

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL

44.45 mm / 1.75 in 15° Pie Cut Template – 6 Sector 90° Elbow – 1D / 1.5D / 2D Radius – Bandsaw Mitered Bend Jig STL

42.4 mm / 1.67 in Pie Cut Jig Kit 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Lobster Back Bend Set STL

Chroma Kit Manifold