Octagon knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Eight flats. Twelve would have been invisible - the faces would sit less than one percent below the circle. Eight sit at 92.4 percent, and that you can see and feel. For the fine split shaft with 24 teeth. The number that trips people up: this shaft measures 5.97 mm over the knurl, not 6.35 - the 1/4 inch is the plain body, the splines are turned down. A knob bored for 6.35 sits loose and spins. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight…

♥ 1

Cults3D'da aç

#control knob #knob #octagon knob #597mm shaft #24 spline #24 teeth #knurled shaft #split shaft #electric guitar #knurled replacement control knob #guitar pedal #amplifier

Octagon knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Octagon knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Octagon knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Octagon knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Octagon knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for D-shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports