Print-in-Place Clearance Test - 7 Captive Rotors 0.10 to 0.40 mm - Tolerance Calibration - STL + 3MF

Find the smallest gap your printer can really print, before you print a big hinge, gearbox or articulated model and it comes out fused. Seven captive rotors sit in one plate at 0.10, 0.15, 0.20, 0.25, 0.30, 0.35 and 0.40 mm clearance. Print it once, then try to turn each rotor: the smallest one that breaks free is your print-in-place clearance. **Why you can trust the numbers** - Every gap was measured on the final mesh: 0.100 / 0.150 / 0.200 / 0.250 / 0.300 / 0.350 / 0.400 mm, all exactly as l…

♥ 0