Print-in-Place Tolerance Test - Find Your Clearance, 0.1 to 0.6 mm Spinning Pins (OpenSCAD)
Arthur Both · Printables
ÜcretsizCreative Commons — Attribution — Noncommercial — Share Alike
Six pins in six holes with gaps from 0.1 to 0.6 mm. See which turn freely to set clearance for moving parts.
♥ 1 · ↓ 4
Printables'da açBenzer modeller
Print in Place Tolerance Test
Printables
Print in place tolerance test
Printables
/https://fbi.cults3d.com/uploaders/52110506/illustration-file/7d22388b-1d98-499e-af5b-77a745924fbf/00_PK961_01_hero.jpg)
Print-in-Place Clearance Test - 7 Captive Rotors 0.10 to 0.40 mm - Tolerance Calibration - STL + 3MF
Cults3D
Parametric Print-in-Place Tolerance Test
Printables
Tolerance Test - Print in Place
Printables
Pin Hinge Print-in-Place Tolerance Test - PIP - 2 Versions
Printables
Tolerance Test (Print in place, Moving Parts)
Thingiverse
/https://fbi.cults3d.com/uploaders/52110506/illustration-file/bd80040c-d94e-4439-932c-6cc2028b6d5c/00_PK962_01_hero.jpg)
All-in-One 3D Printer Torture Test - Overhangs, Bridges, Holes, Stringing, Thin Walls + Print-in-Place Spinner - STL + 3MF
Cults3D
Hinge Tolerance Test Piece for the Bookshelf Deck Box
MyMiniFactory
Print in Place Tolerance Tester
Printables
Horizontal Print in Place Axle Tolerance tester
Printables
Print in Place Engine Benchmark - The Bengine Key-Chain
Printables