Ribbed knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Fourteen deep flutes. Grips with oily or gloved fingers, which is why it belongs on machines rather than on a desk. For the 1/4 inch shaft with the deep flat, 3.96 mm remaining. Careful: 1/4 inch D-shafts come in two shapes. If your flat leaves about 5.5 mm, you want the shallow-flat version of this knob instead. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 17.6 mm | 2.4 cm³ | 3.1 g | | 20 mm | 17.6 mm…

♥ 1

Cults3D'da aç

#control knob #knob #ribbed knob #635mm shaft #d shaft #635mm d shaft #control knob for potentiometer #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer

Ribbed knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Ribbed knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Ribbed knob for Round shaft 12.0 mm - 4 sizes 25/30/36/44 mm, no supports

Ribbed knob for Round shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports

Ribbed knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Ribbed knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Ribbed knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports