Tapered knob with pointer for D-shaft 5.0 mm - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Tapered body with a moulded pointer nose. For dials where the setting has to be readable from across the room. For the 5 mm shaft with a flat at 4.52 mm - the NEMA 17 stepper shaft, the one on your printer's Z axis and extruder. Bore built to 4.6 mm. A knob bored for 4.0 wobbles on it; measure across the flat if unsure. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 15.6 mm | 2.0 cm³ | 2.5 g | | 20 mm | 1…

♥ 1

Cults3D'da aç

#control knob #knob #tapered knob with pointer #5mm shaft #d shaft #5mm d shaft #3d printer #stepper motor #nema 17 #control knob for potentiometer #extruder #fits nema 17

Tapered knob with pointer for D-shaft 5.0 mm - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Tapered knob with pointer for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for D-shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Tapered knob with pointer for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Tapered knob with pointer for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Tapered knob with pointer for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Tapered knob with pointer for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Tapered knob with pointer for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports