Two-wing knob with heat-set insert M4 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Two opposed wings, the wing-nut shape. Thumb and forefinger and nothing else - the most torque per gram of plastic in this library. Bored 5.6 mm for a standard brass heat-set insert M4. Melt it in with a soldering iron at about 220 C and let it cool under light pressure. The knob then takes a machine screw as often as you like - that is the difference to a printed thread, which is good for a few dozen turns. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Vol…

♥ 0