Vacuum and dust extraction adapters - 3 to 4 inch class - 76 / 80 / 100 / 102 / 120 mm, 85 sizes, no supports

$2,23CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

**85 adapters for the 3 to 4 inch class - 76 / 80 / 100 / 102 / 120 mm.** Chip extraction: 3 and 4 inch hoses and the ducts on planers, saws and dust collectors. Every part has both ends as cones that run straight through the nominal size over 16 mm. The same end clamps *inside* a socket and *under* a hose - no right way round, no second version to print. > These are nominal diameters, not licensed brand fittings. Brand names are named so you can find your size, not as a compatibility promise -…

♥ 1

Cults3D'da aç

#vacuum #dust extraction #adapter #hose adapter #shop vac #dust collection #reducer #workshop #woodworking #power tools #sander #vacuum cleaner

Vacuum and dust extraction adapters - 3 to 4 inch class - 76 / 80 / 100 / 102 / 120 mm, 85 sizes, no supports

Benzer modeller

Vacuum and dust extraction adapters for 200 mm - 29 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 180 mm - 29 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 160 mm - 29 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 150 mm - 29 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 140 mm - 29 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 125 mm - 24 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 90 mm - 24 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 75 mm - 23 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 65 mm - 23 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 110 mm - 24 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 120 mm - 19 sizes, both ends fit either way, no supports

Vacuum and dust extraction adapters for 102 mm - 19 sizes, both ends fit either way, no supports