printedworks
Y-Reducing Splitter 90 to 2 x 60 mm

Y-Reducing Splitter 90 to 2 x 60 mm

AMPERELAB3D · Cults3D

$1,11CULTS PU - Private Use
Ticari kullanım: izinli görünmüyorLisans bilgisi ve sorumluluk reddi

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Y-piece for warm air ducting in campervans, motorhomes and vans. One 90 mm inlet, two 60 mm outlets, branching at 45°. **The branch angle is the point.** A 90 degree tee costs far more pressure than a shallow Y. At 45° the flow follows the wall instead of tearing off at the edge, so the far branch still gets warm air. The crotch between the two branches is radiused 8.0 mm / 5.6 mm. A sharp crotch is where a printed splitter cracks first and where the flow separates. Both problems are solved by…

♥ 0

Cults3D'da aç

Benzer modeller