38 mm / 1.50 in Flat 3-Into-1 Exhaust Collector Cutting Template STL – 3 Runner Header Merge Jig for Custom Manifold Fabrication

$5,59CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable cutting template for fabricating a FLAT 3-INTO-1 EXHAUST MERGE COLLECTOR from Ø38.0 mm round tubing. This model is part of the Europe Metric OD series and is designed for three equal-diameter tubes arranged side-by-side in the same plane before merging into a single collector. TUBE OUTSIDE DIAMETER: Ø38.0 mm Imperial reference: Approximately 1.50 in 38.0 mm = approximately 1.496 in. The exact design reference for this model is Ø38.0 mm OD. COLLECTOR STYLE: Flat 3-Into-1 Mer…

♥ 0

Cults3D'da aç

#38mm merge collector #flat exhaust header #3 tube merge jig #three runner manifold #exhaust collector guide #side by side merge #header cutting stencil #flat manifold tool #38mm tube jig #twin scroll header #divided turbo merge #3 cylinder header

38 mm / 1.50 in Flat 3-Into-1 Exhaust Collector Cutting Template STL – 3 Runner Header Merge Jig for Custom Manifold Fabrication

Benzer modeller

50.8 mm / 2.00 in Flat 3-Into-1 Merge Collector Template STL – 3 Runner Exhaust Header Cutting Guide for Manifold Fabrication

50.8 mm / 2 in OD Pie Cut Jig 10° – 9 Slice Show Quality Bend – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Cutting Fixture STL

Circle drawing template 150 mm - 12 through circles from 6 to 38 mm, 5 mm plate

Cheese Platte 150 x 75 x 7,1 mm, 1/4", 3/8" Innen-Gewinde

Rattle-Free Drawer Organizer – Laser-Cut Tray Modules 100/150/200 mm for 2.8/3.0/3.2 mm Ply, SVG + DXF

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL

38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL

38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL

35 mm / 1.38 in Flat 3-Into-1 Merge Collector Template STL – Three Tube Exhaust Header Cutting Jig for Manifold Fabrication

Hydroponic Net Cups for Towers, 38–75 mm (1.5–3 inch), Short and Long – No Supports