45 mm / 1.77 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

$7,86CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable Exhaust Merge Collector Pipe Cutting Template designed specifically for Ø45.0 mm / approximately 1.77 in round tubing. This model is part of the Europe Metric OD series and is intended for preparing equal-diameter exhaust runners before assembling multi-tube merge collectors, header collectors and custom exhaust manifold collector sections. TUBE OUTSIDE DIAMETER: Ø45.0 mm / approximately 1.77 in 45.0 mm = approximately 1.772 in. The exact reference dimension for this model…

♥ 0

Cults3D'da aç

#merge collector template #exhaust merge collector #collector cutting jig #collector template #header collector #exhaust collector #merge collector jig #pipe cutting template #tube cutting template #collector fabrication #header fabrication #manifold fabrication

45 mm / 1.77 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

Benzer modeller

45 mm / 1.77 in Flat 3-Into-1 Exhaust Collector Template STL – 3 Runner Merge Cutting Guide for Header & Turbo Manifold Fabrication

33.7 mm / 1.33 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

FPV Prop Nut Wrench #11 – 8 mm M5 Prop Nut, 7 / 5.5 / 4 mm Hex Wrenches + 4-in-1 Star Tool | 4 Versions

Wall Rigidity and Adhesion Test FOR 0,4MM NOZZLE

Very large floating ducky

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL

44.45 mm / 1.75 in 15° Pie Cut Template – 6 Sector 90° Elbow – 1D / 1.5D / 2D Radius – Bandsaw Mitered Bend Jig STL

44.45 mm / 1.75 in Pie Cut Jig 10° – Header Primary Tube – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Segmented Bend STL

Bath plug 1 3/4 inch 45 mm

Drawer organizer insert 73 x 71 x 45 mm - drawer bin 1 x 1 modules, light + sturdy, no supports