45 mm Screw-Mount Utility Wall Hook — STL + OpenSCAD

$1,11CULTS PU - Private Use

A two-screw wall hook for organizing light cables and small workshop accessories. The raised end helps keep items on the arm. A compact mounting plate makes it useful for a work area or utility board. - Overall dimensions: 24 x 45 x 60 mm - Plate thickness: 4.5 mm - Arm projection from mounting surface: 45 mm - Mounting holes: 4.5 mm diameter - Vertical hole centre spacing: 37.8 mm Included: STL model, editable OpenSCAD source and a short printing guide. Units: millimetres. This is a digital fi…

♥ 0

Cults3D'da aç

#wall #hook #garage #storage #cable #hose #stl #openscad

Benzer modeller

French cleat wall rail 240 mm - 45 degree cleat for battery and tool holders
Cults3D
Snap-In Cable Clips – 4 Sizes (3.5 / 5 / 7 / 10 mm), Tape or Screw Mount, No Supports
Cults3D
44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL
Cults3D
44.45 mm / 1.75 in 15° Pie Cut Template – 6 Sector 90° Elbow – 1D / 1.5D / 2D Radius – Bandsaw Mitered Bend Jig STL
Cults3D
44.45 mm / 1.75 in Pie Cut Jig 10° – Header Primary Tube – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Segmented Bend STL
Cults3D
Centaur Spearman — 45 mm Fantasy Miniature | STL + Textured GLB
Cults3D
French Cleat Wandleiste 240 mm - 45 Grad Leiste fuer Akku- und Werkzeughalter
Cults3D
Bath plug 1 3/4 inch 45 mm
Printables
Over-the-Door Wreath Hanger – 35 / 40 / 45 mm Doors, No Supports
Cults3D
Batten-Frame Connector Kit for 40 × 40 / 45 × 45 mm Battens – 10 Parts for a DIY Van Bed, with Fit Coupon
Cults3D

45 mm Screw-Mount Utility Wall Hook — STL + OpenSCAD

Benzer modeller

French cleat wall rail 240 mm - 45 degree cleat for battery and tool holders

Snap-In Cable Clips – 4 Sizes (3.5 / 5 / 7 / 10 mm), Tape or Screw Mount, No Supports

44.45 mm / 1.75 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Header Bend Kit STL

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL

44.45 mm / 1.75 in 15° Pie Cut Template – 6 Sector 90° Elbow – 1D / 1.5D / 2D Radius – Bandsaw Mitered Bend Jig STL

44.45 mm / 1.75 in Pie Cut Jig 10° – Header Primary Tube – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Segmented Bend STL

Centaur Spearman — 45 mm Fantasy Miniature | STL + Textured GLB

French Cleat Wandleiste 240 mm - 45 Grad Leiste fuer Akku- und Werkzeughalter

Bath plug 1 3/4 inch 45 mm

Over-the-Door Wreath Hanger – 35 / 40 / 45 mm Doors, No Supports

Batten-Frame Connector Kit for 40 × 40 / 45 × 45 mm Battens – 10 Parts for a DIY Van Bed, with Fit Coupon