51 mm / 2.01 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

$7,86CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable Exhaust Merge Collector Pipe Cutting Template designed specifically for Ø51.0 mm / approximately 2.01 in round tubing. This model is part of the Europe Metric OD series and is intended for preparing equal-diameter exhaust runners before assembling multi-tube merge collectors, header collectors and custom exhaust manifold collector sections. TUBE OUTSIDE DIAMETER: Ø51.0 mm / approximately 2.01 in 51.0 mm = approximately 2.008 in. The exact reference dimension for this model…

♥ 0

Cults3D'da aç

#merge collector template #exhaust merge collector #collector cutting jig #collector template #header collector #exhaust collector #merge collector jig #pipe cutting template #tube cutting template #collector fabrication #header fabrication #manifold fabrication

51 mm / 2.01 in Exhaust Merge Collector Cutting Template STL – 2-1 3-1 4-1 5-1 6-1 8-1 Metric Header Fabrication

Benzer modeller

51 mm / 2.01 in Flat 3-Into-1 Exhaust Merge Template STL – Three Runner Collector Cutting Guide for Header & Manifold Fabrication

Filament Swatch Holder – 51 Color Organizer + Filament Test Tile - Gridfinity

Zero G Mercury 1/ Nebula 5" LCD Mount

AD5X fan mod for 6*1.5 magnets

S5M (STD 5M) Pulley 20T & 100T, 1:5 Reduction – Printed & Tested

L-menthol 3D Molecular Model — CAS 2216-51-5

1-Bromopropane 3D Molecular Model — CAS 106-94-5

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL

38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL