90° D-Sub Waterproof Backshell 25P

$4,59CULTS CU-ND - Commercial Use - No Derivative

Ticari kullanım: izinli görünüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A tested and fine-tuned 90° D-Sub housing designed for compact electronics, industrial equipment, robotics and custom wiring. • 90° cable exit – ideal where space behind the connector is limited. • O-ring sealed construction. • With high-quality printing, correct assembly and silicone grease, the housing can achieve a completely watertight seal. • Recommended print orientation: print the housing flat on its large base surface, with the connector opening facing upward. • Required hardware: • Loc…

♥ 0

Cults3D'da aç

#d-sub #d-sub backshell #old pc connector #trappesional connector #90 degree #serial port connector #cannon connector #housing

90° D-Sub Waterproof Backshell 25P

Benzer modeller

90° connector 32mm external

42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL

2020 Extrusion Corner Hinge (90° Travel)

44.45 mm / 1.75 in Pie Cut Jig 22.5° – 4 Sector 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow Jig STL

44.45 mm / 1.75 in Pie Cut Jig 18° – 5 Pieces per 90° – Lobster Back Header Bends CLR 1D 1.5D 2D – Bandsaw Jig STL

44.45 mm / 1.75 in 15° Pie Cut Template – 6 Sector 90° Elbow – 1D / 1.5D / 2D Radius – Bandsaw Mitered Bend Jig STL

90° Two Screw Hole Bracket 3D Print

Ender-5 Max heated bed cable releif 90°

48.3 mm / 1.9 in Pie Cut Jig 22.5° – Just 4 Pieces for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL