Dome knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A dome over a knurled band. The dome is deliberately flatter than a hemisphere: a true half-sphere would print at 65 degrees of overhang and need supports. For plain 6 mm shafts without a flat. Holds with an M3 grub screw that cuts its own thread - no brass insert, no tapping. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 17.6 mm | 2.2 cm³ | 2.8 g | | 20 mm | 17.6 mm | 3.3 cm³ | 4.2 g | | 25 mm | 17.6 mm…

♥ 1

Cults3D'da aç

#control knob #knob #dome knob #6mm shaft #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer #fits bourns ptv09 #fits bourns pec11r #fits bourns pdb18

Dome knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dome knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 12.0 mm - 4 sizes 25/30/36/44 mm, no supports

Dome knob for Round shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports