Dome knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

A dome over a knurled band. The dome is deliberately flatter than a hemisphere: a true half-sphere would print at 65 degrees of overhang and need supports. Bored 4 mm for a standard brass heat-set insert M3. Melt it in with a soldering iron at about 220 C and let it cool under light pressure. A printed M3 thread strips after a handful of turns; brass does not. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm…

♥ 0