Hexadecimal "15" Slide Puzzle + 0 (print-in-place)

Florian · Printables

ÜcretsizCreative Commons — Attribution — Noncommercial — Share Alike

Ticari kullanım: izinli görünmüyor · Atıf istiyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Printables sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

This is the classic "15" number slide puzzle but with hexadecimal (base-16) numbers from 0-9 + A-F.

♥ 4 · ↓ 34

Printables'da aç

#puzzle #printinplace #hex #15 #sliding #letters #numbers #pip #inplace #puzzlegame #hexadecimal

Benzer modeller

Scraper V2 – 15-Minute Print
Printables
HO Scale Culvert Openings. 15 to 48 inch With Headwalls
Thingiverse
15 kg gas bottle bracket (printable on small beds)
Thingiverse
Iphone 15 Pro
Sketchfab
Anatomical Sandal Last STL | 3D Printable Footbed Last | US 7–15 (Duna)
Cults3D
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL
Cults3D
Picture Hanging Tool - Mark the Nail Spot First Time, with 15 cm Ruler, No Supports (OpenSCAD)
Printables
Dual 15 mm Rod Clamp for Camera Rigs
Thingiverse

Hexadecimal "15" Slide Puzzle + 0 (print-in-place)

Benzer modeller

Scraper V2 – 15-Minute Print

HO Scale Culvert Openings. 15 to 48 inch With Headwalls

15 kg gas bottle bracket (printable on small beds)

Iphone 15 Pro

Anatomical Sandal Last STL | 3D Printable Footbed Last | US 7–15 (Duna)

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL

38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL

38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL

Picture Hanging Tool - Mark the Nail Spot First Time, with 15 cm Ruler, No Supports (OpenSCAD)

Dual 15 mm Rod Clamp for Camera Rigs