Pipe mount for tent enclosure framework with GoPro fitting (and with LG C270 camera extension)
Mats H · Printables
ÜcretsizCreative Commons — Attribution — Share Alike
Pipe mount suitable to clamp on to the frameworks of an enclosure tent with a GoPro fitting.
♥ 47 · ↓ 280
Printables'da açBenzer modeller
Piped Spool Holder
Printables
40mm print in place pipe clamp
Thingiverse
Close coupled toilet cistern feed pipe hand spanner
Thingiverse
110mm Pipe End Caps (+one for chicken feeders)
Thingiverse
Rohrschelle / Pipe Clamp
Thingiverse
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/43bf7ca7-5f16-484e-b120-c853bd861155/PieCut_42.4mm_22.5deg_1_main.png)
42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL
Cults3D
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/77c16a3f-2a7a-416f-a899-e0739ae502a3/PieCut_42.4mm_18deg_1_main.png)
42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL
Cults3D
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/b463295f-07c6-4ed3-9781-97f263a8ec42/PieCut_38.1mm_22.5deg_1_main.png)
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/9a25ab60-d54e-4e53-9846-ca9a3ac8544d/PieCut_38.1mm_15deg_1_main.png)
38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL
Cults3D
/https://fbi.cults3d.com/uploaders/32747490/illustration-file/0fa43ff9-1c10-4146-913a-812a4e0e1247/PieCut_38.1mm_10deg_1_main.png)
38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL
Cults3D
Snapmaker U1 intake cooler pipe
Printables
Straight Exhaust Pipe - CC2 to 100mm Duct (Using Original Screws)
Printables