Ribbed knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Fourteen deep flutes. Grips with oily or gloved fingers, which is why it belongs on machines rather than on a desk. Bored 5.6 mm for a standard brass heat-set insert M4. Melt it in with a soldering iron at about 220 C and let it cool under light pressure. The knob then takes a machine screw as often as you like - that is the difference to a printed thread, which is good for a few dozen turns. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in…

♥ 0

Cults3D'da aç

#control knob #knob #ribbed knob #56mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits ruthex m4 #no supports #parametric

Benzer modeller

Ribbed knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M5 - clamping knob, 4 sizes 20/25/30/36 mm, no supports
Cults3D
Ribbed knob for Round shaft 12.0 mm - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob for Round shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Ribbed knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D

Ribbed knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Ribbed knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Ribbed knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Ribbed knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Ribbed knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Ribbed knob with hex nut pocket M5 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Ribbed knob for Round shaft 12.0 mm - 4 sizes 25/30/36/44 mm, no supports

Ribbed knob for Round shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports

Ribbed knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports