Ribbed knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

$1,11CULTS PU - Private Use

Fourteen deep flutes. Grips with oily or gloved fingers, which is why it belongs on machines rather than on a desk. Takes a DIN 934 hex nut M4 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M4 is what most printer beds, carriage plates and small fixtures use. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 20…

♥ 0

Cults3D'da aç

#control knob #knob #ribbed knob #7mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Benzer modeller

Ribbed knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob with hex nut pocket M5 - clamping knob, 4 sizes 20/25/30/36 mm, no supports
Cults3D
Ribbed knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob for Round shaft 12.0 mm - 4 sizes 25/30/36/44 mm, no supports
Cults3D
Ribbed knob for Round shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports
Cults3D
Ribbed knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports
Cults3D
Ribbed knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports
Cults3D

Ribbed knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Benzer modeller

Ribbed knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Ribbed knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Ribbed knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Ribbed knob with hex nut pocket M5 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Ribbed knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Round shaft 12.0 mm - 4 sizes 25/30/36/44 mm, no supports

Ribbed knob for Round shaft 10.0 mm - 4 sizes 20/25/30/36 mm, no supports

Ribbed knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Ribbed knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports