Six-spoke handwheel with heat-set insert M5 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Six spokes instead of four. Lighter than the handwheel and more finely divided, so the hand always finds a spoke. Bored 6.4 mm for a standard brass heat-set insert M5. Melt it in with a soldering iron at about 220 C and let it cool under light pressure. M5 with an insert carries more than a printed M5 ever will, and it can be undone and done up again without thinking about it. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|…

♥ 0

Cults3D'da aç

#control knob #knob #six-spoke handwheel #64mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits ruthex m5 #no supports #parametric

Six-spoke handwheel with heat-set insert M5 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Benzer modeller

Six-spoke handwheel with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel with hex nut pocket M5 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Six-spoke handwheel with hex nut pocket M6 - clamping knob, 3 sizes 36/44/54 mm, no supports

Six-spoke handwheel with hex nut pocket M4 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Six-spoke handwheel with hex nut pocket M8 - clamping knob, 3 sizes 36/44/54 mm, no supports

Six-spoke handwheel for Square 6.0 mm - 4 sizes 30/36/44/54 mm, no supports

Six-spoke handwheel for D-shaft 6.0 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for D-shaft 6.35 mm, shallow flat - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Round shaft 6.35 mm (1/4 in) - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Knurled shaft 6 mm, 40 teeth - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for D-shaft 6.35 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports

Six-spoke handwheel for Knurled shaft 6 mm, 18 teeth - 4 sizes 25/30/36/44 mm, no supports