Skirted knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A slim head on a wide knurled skirt. The skirt runs past the panel as a scale ring and gives the fingers something to hold that the head alone does not. For the 18-tooth knurled 6 mm shaft - the metric one, found on most imported pots. Press-fit, no screw. The teeth run 8 mm deep because that is how far the knurl reaches on the shaft; beyond it the bore is clear, so the knob does not bind on the smooth part. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Vol…

♥ 1

Cults3D'da aç

#control knob #knob #skirted knob #6mm shaft #18 spline #18 teeth #knurled shaft #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer

Skirted knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Skirted knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Skirted knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Skirted knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports