Skirted knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A slim head on a wide knurled skirt. The skirt runs past the panel as a scale ring and gives the fingers something to hold that the head alone does not. For the 1/4 inch shaft with the shallow flat, 5.5 mm remaining. The other 1/4 inch shape leaves 3.96 mm - measure across the flat before you print. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 17.6 mm | 2.2 cm³ | 2.8 g | | 20 mm | 17.6 mm | 2.9 cm³ | 3.…

♥ 1

Cults3D'da aç

#control knob #knob #skirted knob #635mm shaft #d shaft #635mm d shaft #1/4 inch #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer

Skirted knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Skirted knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Skirted knob for D-shaft 5.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Skirted knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Skirted knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Skirted knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Skirted knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports