Square duct 75x75 mm, 200 mm long – square ventilation duct, spigot ends, no supports

$2,22CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A straight rectangular duct, 75 × 75 mm nominal size and 200 mm long, with a plain spigot at both ends. It is the basic length of a printed ventilation line: plug it into couplers, elbows, reducers and socket ducts of the same size. **Picture 1:** multi-view drawing with all dimensions and cross-sections. **Picture 2:** the part as a render. **Picture 3:** a section view. ## Dimensions (mm, measured on the CAD solid) | Dimension | Value | |---|---| | Nominal size (outside of the spigot) | 75 ×…

♥ 0

Cults3D'da aç

#rectangular duct #flat duct #75x75 duct #flat ventilation duct #square duct #square duct 75x75 #ventilation duct #air duct #straight duct #rectangular duct 75x75 #200mm flat duct #75x75mm

Square duct 75x75 mm, 200 mm long – square ventilation duct, spigot ends, no supports

Benzer modeller

Delta-P fan duct V2-R2 with square nut.

Square duct to round adapter 125x125 to 125 mm, socket on flat end – offset, flush to wall

Square duct with socket 150x150 mm, 250 mm long – square ventilation duct, push-fit, no supports

Square duct with socket 125x125 mm, 250 mm long – square ventilation duct, push-fit, no supports

Square duct 100x100 mm, 400 mm long – square ventilation duct, spigot ends, no supports

Sci-Fi Industrial Ventilation Duct, Square Pipe Elbow Bend, Modular Conduit Corridor, Grimdark Factory Scenery

Square duct to round adapter 150x150 to 150 mm, socket on flat end – offset, flush to wall

Square duct to round adapter 80x80 to 100 mm – offset, flush to wall, wall/ceiling mount

Square duct 150x150 mm, 200 mm long – square ventilation duct, spigot ends, no supports

Square duct 125x125 mm, 200 mm long – square ventilation duct, spigot ends, no supports

Square duct coupler 100x100 mm – socket to socket, square ventilation duct connector, no supports

Square duct with socket 100x100 mm, 350 mm long – square ventilation duct, push-fit, no supports