Three-point knob for Split shaft fine, 24 teeth - 4 sizes 30/36/44/54 mm, no supports

$1,11CULTS PU - Private Use

Three points on a round body, joined by straight tangent flanks. Unlike the soft three-lobe knob the fingers find a stop at once - the grip for things that must be done up firmly. For the fine split shaft with 24 teeth. The number that trips people up: this shaft measures 5.97 mm over the knurl, not 6.35 - the 1/4 inch is the plain body, the splines are turned down. A knob bored for 6.35 sits loose and spins. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Vo…

♥ 1

Cults3D'da aç

#control knob #knob #three-point knob #597mm shaft #24 spline #24 teeth #knurled shaft #split shaft #electric guitar #knurled replacement control knob #guitar pedal #amplifier

Benzer modeller

Three-point knob for Split shaft coarse, 18 teeth - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for D-shaft 6.35 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for Round shaft 6.0 mm - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for Square 6.0 mm - 3 sizes 36/44/54 mm, no supports
Cults3D
Three-point knob for D-shaft 6.0 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for D-shaft 6.35 mm, shallow flat - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-point knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 30/36/44/54 mm, no supports
Cults3D
Three-Zone Paint Test Tile with Recipe Label Area - STL and Editable Source
Cults3D
Blupo - Cute Three-Eyed Alien Mascot | Easy 3D Print - No Supports | Original STL for FDM & Resin
Cults3D

Three-point knob for Split shaft fine, 24 teeth - 4 sizes 30/36/44/54 mm, no supports

Benzer modeller

Three-point knob for Split shaft coarse, 18 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for D-shaft 6.35 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Round shaft 6.0 mm - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Square 6.0 mm - 3 sizes 36/44/54 mm, no supports

Three-point knob for D-shaft 6.0 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for D-shaft 6.35 mm, shallow flat - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-Zone Paint Test Tile with Recipe Label Area - STL and Editable Source

Blupo - Cute Three-Eyed Alien Mascot | Easy 3D Print - No Supports | Original STL for FDM & Resin