Three-spoke handwheel with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Three spokes, three big windows. The lightest wheel in the library, and the easiest to grip through with a finger. Bored 4 mm for a standard brass heat-set insert M3. Melt it in with a soldering iron at about 220 C and let it cool under light pressure. A printed M3 thread strips after a handful of turns; brass does not. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 25 mm | 9.6 mm | 2.3 cm³ | 2.9 g | | 30 mm | 9.…

♥ 0

Cults3D'da aç

#control knob #knob #three-spoke handwheel #4mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits ruthex m3 #no supports #parametric

Three-spoke handwheel with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Benzer modeller

Three-spoke handwheel with hex nut pocket M5 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Three-spoke handwheel with hex nut pocket M4 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Three-spoke handwheel for Round shaft 6.0 mm - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for Split shaft coarse, 18 teeth - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for Split shaft fine, 24 teeth - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for Knurled shaft 6 mm, 20 teeth - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for D-shaft 6.0 mm - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for D-shaft 5.0 mm - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for D-shaft 6.35 mm, shallow flat - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for Round shaft 6.35 mm (1/4 in) - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for Knurled shaft 6 mm, 40 teeth - 4 sizes 25/30/36/44 mm, no supports

Three-spoke handwheel for D-shaft 6.35 mm, deep flat - 4 sizes 25/30/36/44 mm, no supports