1in Hanger

Said · MyMiniFactory

ÜcretsizCreative Commons - Attribution - Noncommercial - ShareAlike

Ticari kullanım: izinli görünmüyor · Atıf istiyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin MyMiniFactory sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Hanger which can be mounted to any surface with double sided tape or you can still use screws as usual. I'm using it for keys and masks omw out home, upscaled version with larger tape for coats. Print upright with supports.

♥ 3

MyMiniFactory'da aç

#hanger #keys #organizer #clothes

Benzer modeller

Centauri Carbon 1 w/ Canvas 4 in 1 PTFE Tube Support
Printables
CoPrint Printable 8-in-1 Adapter
Printables
Headphone hanger system for 1/2 in dowel rods
Thingiverse
2-in-1 AMS Test and Color Bleed Test
Thingiverse
42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL
Cults3D
42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL
Cults3D
38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL
Cults3D
38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL
Cults3D
38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL
Cults3D
head holder for snapmaker a350 3 in 1
Printables

1in Hanger

Benzer modeller

Centauri Carbon 1 w/ Canvas 4 in 1 PTFE Tube Support

CoPrint Printable 8-in-1 Adapter

Headphone hanger system for 1/2 in dowel rods

2-in-1 AMS Test and Color Bleed Test

42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

38.1 mm / 1.5 in Pie Cut Jig Set 4 in 1 – 10° 15° 18° 22.5° – CLR 1D 1.5D 2D – Bandsaw Lobster Back Bend Kit STL

38.1 mm / 1.5 in Pie Cut Jig 22.5° – 4 Sectors 90° Bend – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Cutting Jig STL

38.1 mm / 1.5 in 18° Pie Cut Jig – 5 Pieces per 90° – Lobster Back Bend 1D / 1.5D / 2D – Bandsaw Tube Jig STL

38.1 mm / 1.5 in Pie Cut Template 15° for Bandsaw – 1D 1.5D 2D Radius in One Jig – Mitered Elbow Cutting Guide STL

38.1 mm / 1.5 in Pie Cut Jig 10° – 3 in 1 CLR 1D 1.5D 2D – Bandsaw Lobster Back Segmented Bend STL

head holder for snapmaker a350 3 in 1