42.4 mm / 1.67 in Flat 3-Into-1 Header Merge Cutting Template STL – Side-by-Side Exhaust Collector & Turbo Manifold Jig

$5,59CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Digital 3D printable pipe marking and cutting template for fabricating a FLAT 3-INTO-1 MERGE COLLECTOR from Ø42.4 mm round tubing. This model belongs to the Europe Metric OD series and is intended for three equal-diameter runners positioned side-by-side in one plane before being joined into a single collector. TUBE OUTSIDE DIAMETER: Ø42.4 mm Imperial reference: Approximately 1.67 in 42.4 mm = approximately 1.669 in. The exact dimensional reference for this STL is Ø42.4 mm OD. COLLECTOR STYLE: F…

♥ 0

Cults3D'da aç

#424mm header tool #flat merge collector #three runner exhaust #side by side merge #3 into 1 header #exhaust collector jig #manifold marking guide #flat header junction #424mm tube jig #twin scroll runner #divided turbo manifold #collector fitup fixture

42.4 mm / 1.67 in Flat 3-Into-1 Header Merge Cutting Template STL – Side-by-Side Exhaust Collector & Turbo Manifold Jig

Benzer modeller

42.4 mm / 1.67 in Pie Cut Jig 22.5° – Only 4 Cuts for 90° – 3 in 1 Radius 1D 1.5D 2D – Bandsaw Segmented Elbow STL

42.4 mm / 1.67 in Pie Cut Jig 18° – 5 Sector 90° Lobster Back Bend – CLR 1D 1.5D 2D – Bandsaw Tube Cutting Jig STL

42.4 mm / 1.67 in Pie Cut Jig Kit 4 in 1 – 10° 15° 18° 22.5° – 1D 1.5D 2D Radius – Bandsaw Lobster Back Bend Set STL

42.4 mm / 1.67 in 15° Pie Cut Template – 6 Pieces 90° Elbow – 1D 1.5D 2D in One Jig – Bandsaw Mitre Bend STL

42.4 mm / 1.67 in Pie Cut Jig 10° – 9 Sectors per 90° – 3 Radius 1D 1.5D 2D – Bandsaw Segmented Bend Jig STL

Wall Rigidity and Adhesion Test FOR 0,4MM NOZZLE

Very large floating ducky

Photographic plate stand (5,4,3,2 or 1 mm) - Socle pour plaque photo

BullDog Extruder mount with 1:4 speed reduction for 2.85 mm filament (for 3030 extrusions)

Filament Spool Clip - 1.75 and 2.85 mm (4 Pack)

IKEA VIMLE foot riser 1/2/3/4/5/10/15/20/25/50 mm

Schlauchtuellen G1/2 bis G1 1/4 - 8 Groessen fuer 13 bis 32 mm Schlauch, stuetzfrei