Octagon knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Eight flats. Twelve would have been invisible - the faces would sit less than one percent below the circle. Eight sit at 92.4 percent, and that you can see and feel. Takes a DIN 934 hex nut M4 from the back - the thread is steel, not printed plastic, so it survives being done up hard. The bolt runs right through, so its length does not matter. M4 is what most printer beds, carriage plates and small fixtures use. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height |…

♥ 0

Cults3D'da aç

#control knob #knob #octagon knob #7mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits din 934 #fits iso 4032 #fits din en 20273

Octagon knob with hex nut pocket M4 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Benzer modeller

Octagon knob with hex nut pocket M10 DIN - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Octagon knob with hex nut pocket M6 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Octagon knob with hex nut pocket M8 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Octagon knob with hex nut pocket M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Octagon knob with hex nut pocket M5 - clamping knob, 4 sizes 20/25/30/36 mm, no supports

Octagon knob with heat-set insert M5 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Octagon knob with heat-set insert M4 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Octagon knob with heat-set insert M3 - clamping knob, 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for Square 8.0 mm - 4 sizes 25/30/36/44 mm, no supports

Octagon knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Octagon knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports