Dome knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A dome over a knurled band. The dome is deliberately flatter than a hemisphere: a true half-sphere would print at 65 degrees of overhang and need supports. For the coarse split shaft with 18 teeth, 5.99 mm over the knurl. If your knob rocks on the shaft you have the fine 24-tooth type instead. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |---|---|---|---| | 16 mm | 15.6 mm | 2.2 cm³ | 2.7 g | | 20 mm | 15.6 mm | 3.2 cm³ | 4.0 g |…

♥ 1

Cults3D'da aç

#control knob #knob #dome knob #599mm shaft #18 spline #18 teeth #knurled shaft #split shaft #electric guitar #knurled replacement control knob #guitar pedal #amplifier

Dome knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dome knob for Split shaft fine, 24 teeth - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 3/8 in (9.525 mm) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 5/16 in (7.9375 mm) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 3/16 in (4.7625 mm) - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Round shaft 4.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports