Dome knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

$1,10CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

A dome over a knurled band. The dome is deliberately flatter than a hemisphere: a true half-sphere would print at 65 degrees of overhang and need supports. For the 18-tooth knurled 6 mm shaft - the metric one, found on most imported pots. Press-fit, no screw. The teeth run 8 mm deep because that is how far the knurl reaches on the shaft; beyond it the bore is clear, so the knob does not bind on the smooth part. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height |…

♥ 0

Cults3D'da aç

#control knob #knob #dome knob #6mm shaft #18 spline #18 teeth #knurled shaft #potentiometer #rotary encoder #amplifier #mixing desk #synthesizer

Dome knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 16/20/25/30 mm, no supports

Benzer modeller

Dome knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 6.35 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 6.0 mm, deep flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 16/20/25/30 mm, no supports

Dome knob for D-shaft 6.35 mm, shallow flat - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Round shaft 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Double-D 6.0 mm - 4 sizes 16/20/25/30 mm, no supports

Dome knob for Square 6.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Hex bit shank 1/4 in (6.35 mm AF) - 4 sizes 20/25/30/36 mm, no supports

Dome knob for D-shaft 8.0 mm - 4 sizes 20/25/30/36 mm, no supports

Dome knob for Split shaft coarse, 18 teeth - 4 sizes 16/20/25/30 mm, no supports