Three-point knob with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

$1,11CULTS PU - Private Use

Ticari kullanım: izinli görünmüyor

Bu özet, kaynak sitedeki lisans adından otomatik çıkarılır; hatalı ya da eksik olabilir ve hukuki tavsiye değildir. PrintedWorks modelleri barındırmaz, lisans vermez ve lisansın doğruluğu ya da modelin kullanımı konusunda hiçbir sorumluluk kabul etmez. Kullanım koşulları için tek geçerli kaynak, modelin Cults3D sayfasındaki lisans ve tasarımcının kendi şartlarıdır.

Three points on a round body, joined by straight tangent flanks. Unlike the soft three-lobe knob the fingers find a stop at once - the grip for things that must be done up firmly. Bored 4 mm for a standard brass heat-set insert M3. Melt it in with a soldering iron at about 220 C and let it cool under light pressure. A printed M3 thread strips after a handful of turns; brass does not. ## Sizes in the download All 4 diameters, same shaft fitting: | Diameter | Height | Volume | Weight in PETG | |-…

♥ 0

Cults3D'da aç

#control knob #knob #three-point knob #4mm shaft #clamping knob #thumb screw #knurled replacement control knob #fixture #workbench #fits ruthex m3 #no supports #parametric

Three-point knob with heat-set insert M3 - clamping knob, 4 sizes 25/30/36/44 mm, no supports

Benzer modeller

Three-point knob with hex nut pocket M4 - clamping knob, 4 sizes 30/36/44/54 mm, no supports

Three-point knob for D-shaft 6.35 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Knurled shaft 6 mm, 18 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Round shaft 6.0 mm - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Split shaft coarse, 18 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Split shaft fine, 24 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Knurled shaft 6 mm, 20 teeth - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Square 6.0 mm - 3 sizes 36/44/54 mm, no supports

Three-point knob for D-shaft 6.0 mm, deep flat - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for D-shaft 6.35 mm, shallow flat - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Round shaft 6.35 mm (1/4 in) - 4 sizes 30/36/44/54 mm, no supports

Three-point knob for Knurled shaft 6 mm, 40 teeth - 4 sizes 30/36/44/54 mm, no supports